How To Make Snow Foam Car Wash Liquid: Complete Guide

Do you know what is the purpose of snow foam car wash? As it is the pre-washing process, in which, snow foam will lift up the dirt, pollen, and grime from your vehicle’s surface.  Moreover, a snow foam car washes away all the grime and pollutant from the car and softens the large dirt particles. Furthermore, it protects the car paint as well.  Pollens on the car affects the car’s finish, but the snow foam takes away those pollens particle from the surface without affecting the car’s shine.

 But wait! 

How Can You Make Snow Foam Car Wash?

Let us explain the method that how can you get the snow foam car wash to get rid of large particles of dirt from your car.

Things important for snow foam:

Do you know which things and procedures are important for making thick snow foam? Let us explore these essential materials and methods.

Things you need:

To get the snow foam for your car, you need to get the following things, which are as follows.

  1. Foam gun connected with a pressure washer.
  2. A bottle of foam washer.
  3. A snow foam lance (create the snow foam by mixing water with shampoo like product).

These things are essential for thick snow foam. You should know the precautionary measure before making the snow foam for your car.

Precautionary measure:

  1. If you have a pressure washer, you have to make sure that you have no stop flow connector because it will hinder the flow of water and affects the process of washing cars.
  2. Make sure the hose pipe is not leaking if it has any damage and it has no water leaking from it.
  3. Whenever you finish your pressure washer then turn it off because if you don’t do this then you are leaving all seals under pressure and your machine will lose pressure and you will lose the performance of the pressure washer.
  4. Always buy the high-quality snow foam lance, although it is expensive in price but better than others.
  5. If you make a snow foam then apply a small amount of snow foam on the car to see the results then apply on the whole car.
  6. The other mistake that most people do is not providing the pressure of water to rinse the car. You should keep the size of the hose small, so you can easily give the pressure to the car. If the pressure is too low, then it wouldn’t remove the snow foam from the car.
 Now! 

Get Ready to Get the Knowledge About the Procedure of Making Snow Foam

To get the snow foam at your home. Let’s get explore the steps, so get started without further ado:

Step 1: Mix the soap foam and water in the soap foam gun supply. Moreover, mix it well to make a perfect solution.

Step 2: Now, you have to connect the snow foam gum with the pressure washer and start covering the car with snow foam. Keep the tip of the foam away from your car surface. You have to apply the double layer on dirty and sticky materials.

Step 3: Don’t let the foam dry on the car. Moreover, you have to apply more snow foam to the dry regions.

Step 4: After 4-5 minutes, you have to rinse the water with plenty of water. You have not allowed the snow to dry on the car.

Step 5: Once the entire car is washed, you have to rinse it with plain water from top to bottom. Moreover, you have to keep this in mind.

Conclusion:

That’s it, guys. I hope you find this article interesting and useful.  Moreover, a snow foam car washes away all the grime and pollutant from the car and softens the large dirt particles. Pollens on the car affects the car’s finish, but the snow foam takes away those pollens particle from the surface without affecting the car’s shine. So, you need pre-washing before actual washing. If you have any queries, do ask in the comment section.

Leave a Comment